Sony HES-V1000 To set the output resolution, Settings Server the Changing, Off, Frame, Pause Mode, Black Level (VIDEO OUT), Black Level (COMPONENT OUT), HDMI OUT, HDMI OUT

Black Level (VIDEO OUT)	On
– Sets the black level setting for video signals	– Sets the black level of the output signal to the standard level. Normally select this.
output from the VIDEO OUT jacks.	Off
	– Lowers the standard black level. Use this if the picture becomes too white.
Black Level (COMPONENT OUT)	On
– Sets the black level setting for video signals	– Raises the standard black level. Use this setting if the picture appears too dark.
output from the COMPONENT VIDEO	Off
OUT jacks.	– Sets the black level of the output signal to the standard level. Normally select this.
Pause Mode	Auto
– Sets the picture mode for DVD playback	– Normally select this. Dynamic moving pictures appear without blur.
pause status. For BD-ROMs or discs	Frame
containing AVCHD files, [Auto] will be	– Displays static pictures at high resolution.
automatically selected.

To set the output resolution

Note that the resolution differs depending on the display device, connecting jack, and the source material as below.

When the COMPONENT setting is prioritized

Output Resolution	Component	COMPONENT VIDEO OUT	HDMI OUT
Priority	Resolution
	480i	480i	Not displayed
Component	480p	480p	The same resolution as for
	1080i	1080i (When playing a DVD Video: 480p)
			COMPONENT VIDEO OUT
	720p	720p (When playing a DVD Video: 480p)

zHint

To change [Component Resolution], press ENTER while holding down RETURN (both are in the retractable input and control panel). The output changes with each press: 480i t 480p t 1080i t 720p

When the HDMI setting is prioritized

Output Resolution	HDMI Resolution	HDMI OUT	COMPONENT VIDEO OUT
Priority
			The same resolution as for HDMI
			OUT (however, outputs in 1080i
		Automatically selects the highest resolution	when set to 1080p)
	Auto
		acceptable for your TV.
			(When playing a DVD Video: Not
			displayed if other than 480p is
			selected)
HDMI
	480p	480p	480p
	1080i	1080i	1080i (When playing a DVD Video:
			Not displayed)
	720p	720p	720p (When playing a DVD Video:
			Not displayed)
	1080p	1080p	1080i (When playing a DVD Video:
			Not displayed)

zHints

•For HDMI Resolution, the resolution that the connected TV can display appears.

•You can change the priority from HDMI to Component by pressing ENTER while holding down RETURN.

Settings Server the Changing

113