Audio Settings

 

Settings

 

HDMI Audio Output

Auto

Audio Output ATT

Off

Digital Audio Output

On

The default settings are underlined.

 

Dolby Digital

Downmix PCM

DTS

PCM (BD-ROM)

HDMI Audio Output

–Select the signal type for the HDMI OUT jack.

Auto

–Normally, select this. Outputs audio signals according to the status of the connected HDMI device.

PCM

–Downmixes to 2-channel Linear PCM signals before outputting from the HDMI OUT jack.

Note

Select [PCM] when connecting a TV or an AV amplifier that does not support Dolby Digital or DTS, otherwise noise or no sound may result.

Audio Output ATT–Lowers the audio output level to prevent sound distortion.

On

– Enables Audio Attenuation.

Off

– Disables Audio Attenuation.

Note

This setting does not affect output from the HDMI OUT jack and the DIGITAL OUT (OPTICAL/ COAXIAL) jacks.

Digital Audio Output

–Select whether to output audio signals from the DIGITAL OUT (OPTICAL/COAXIAL) jacks.

On

–Normally select this. You will need to make additional settings described below for the digital output.

Off

– Does not output audio signal from these digital output jacks.

Note

If the external device does not support the audio output formats selected below, loud sound, noise, or no sound may result that could damage your ears or the speaker system.

Dolby Digital

Downmix PCM

 

– Select this when connecting an audio device without a built-in Dolby Digital decoder.

– Select the audio signals output for playback
of discs with audio recorded in Dolby Digital

Dolby Digital

format.

– Select this when connecting an audio device with a built-in Dolby Digital decoder.

 

 

DTS

DTS

 

– Select this when connecting an audio device with a built-in DTS decoder.

– Select the audio signals output for playback

of discs with audio recorded in DTS format. PCM (BD-ROM)– Select this when connecting an audio device without a built-in DTS decoder.

z Hint

The server outputs Linear PCM signals if you play a BD-ROM that contains DTS source with the [PCM (BD-ROM)] setting selected.

48kHz/96kHz PCM

–You can select the maximum sampling frequency for the PCM signals output from the DIGITAL OUT (OPTICAL/COAXIAL) jacks.

48kHz/16bit

– Outputs audio signals of 48 kHz frequency as 48 kHz/16 bit.96kHz/24bit

–Outputs audio signals of 96 kHz frequency as 96 kHz/24 bit. However, the signals will be output as 48 kHz/16bit if the source is copy-protected.

Notes

•If you select [96kHz/24bit] when an AV amplifier that does not support 96 kHz is connected, no sound or a loud sound may result.

•This setting is not effective when the audio signals are output from the AUDIO OUT (L/R) jacks. The signals will be output as analog retaining the original sampling frequency.

•Regardless of the above settings, the HDMI OUT jack outputs 48 kHz signals if the external device does not support 96 kHz signals, and will output 96 kHz signals even if you select [48kHz/16bit] if 96 kHz signals are supported by the device.

114