A message appears notifying that [Standby Mode] in [System Settings] was set to [Standard].

The default setting is [Eco].

Standby Mode Switching

To activate the Music server function even when the power is off, [Standby Mode] under [System Settings] was changed to [Standard].

Close

•The [Standard] setting consumes more power than the [Eco] setting.

•Setting [Music Server Settings] to [On] will automatically set [Standby Mode] to [Standard]. See page 122 for details about [Music Server Settings].

iSelect [Close] and press ENTER.

Easy Setup - Client Registration

4/4

Select the client registration method.

If you are making this setting letter, select [Manual].

AutoManual

RETURN Return

jSelect if you want to change the method for client device registration and press ENTER.

Client registration is required to allow DLNA compatible network audio devices and “Music Transfer” to access the server's music content from other rooms.

In this manual, “client device” refers to devices that receive and play music content on the home network. Home Entertainment Server, that shares music in response to the client’s request is called “server.”

kSelect [Finish] and press ENTER.

•To use the AMG database or the music server function, press HOME, select [Settings] – [Network Settings] – [Music Server Settings] and make necessary changes (page 121).

zHints

•If you want to reset these settings to their factory defaults, select [Settings] – [Resetting] – [Reset to Factory Default] (page 124).

•You can re-run Easy Setup by selecting [Settings] – [Easy Setup] (page 123).

•To keep the power consumption to the minimum when the server is turned off, set [Standby Mode] to [Eco] (see below).

Setting the server to Eco modeaPress HOME to turn on the Home Menu.bSelect [Settings] to display the icons.cSelect [System Settings] and press ENTER.
dSelect [Standby Mode] and press ENTER.eSelect [Eco] and press ENTER.

Started Getting

29