Sony HES-V1000 Labeling a disc, Protecting a disc, Locking a BD-RE/BD-R, bSelect [On] and press ENTER, bSelect [Yes] and press ENTER, Note, Media, Notes, BMedia, FFormat

Shows if the disc contains folders (BD-RE, BD-R only).IDisc settings◆Example: Display for a DVD-RW

Disc Information

Disc Name Close

Media	DVD-RW	Format		Video		Name Input
Title Total	2					Finalize
Rec Date	7/13/2007
						DVD Menu
Recordable		XP :	0H59M	SP :	1H59M	Format
Time		LP :	4H01M	EP :	5H56M
Remaining					4.4/4.7GB

RETURN Finish

ADisc Name

BMedia

CTitle Total

Original title total/Playlist title total*

*for DVD-RW (VR mode), DVD-R (VR mode) onlyDRec Date

Most recent and the oldest dates.

ERecordable Time• Possible continuous recording time

Disc information may not be correct if the disc is recorded on other devices.

FFormatFormat: Indicates the recording format (VR or Video mode) for DVD-RW and DVD-R.GDisc settingsSelectable items vary depending on the disc type. See pages 35 for details.•Name Input•Protect (write-protect)•Finalize•DVD Menu (DVD only)•FormatHRemaining

•Bar indicator for disc capacity

•Disc’s remaining capacity/total capacity

Disc information may not be correct if the disc is recorded on other devices.

Labeling a discName or rename the disc using the Disc Information display.aOn the Disc Information display, select [Name Input] and press ENTER.The on-screen keyboard appears.bAfter entering the disc name, select [Finish] and press ENTER.See page 90 for character input.

Note

You cannot label a disc if the disc is finalized.Protecting a discProtect important discs against accidental erasure and alteration.

aOn the Disc Information display, select [Protect] and press ENTER.The protection display appears.

Protect

Set protection for this disc.

OnOff

bSelect [On] and press ENTER.Locking a BD-RE/BD-RSet a password to control playback of recordable BDs.aOn the Disc Information display, select [Lock] and press ENTER.The lock display appears.

Disc Lock Settings

Currently the disc is not locked.

Do you want to set a password and lock the disc?

YesNo

bSelect [Yes] and press ENTER.The password display appears.

Set Password

The disc will be locked so the content cannot be viewed. Set the password required to operate.

OK

- - - -

Cancel

Operation will not be possible if you forget the password.

cEnter a password using the number buttons, select [OK], and press ENTER.

After you remove the disc, the disc will become unplayable without the password.

To unlock, repeat the steps and select [Yes] in step 2.

Notes

•You will need the password for playback as well as for unlocking the disc.

•Do not forget the password, as the password setting cannot be cleared without the password.

•Do not forget the password. The password will be required when you play the locked BD-RE/BD-R again on the server.

•When [Standby Mode] is set to [Standard], the disc may play without the password if you turn off the power after unlocking the disc.

34