Music Server Settings

–This setting is a prerequisite for the use of “Music Transfer,” “PARTY MODE,” and music sharing in the house. See page 26 for the network settings, and also the device manuals for their playback procedures.

Quickest way to get started

1Set [Music Server Function] to [On].2Set [Client Registration] to [Auto].Music Server FunctionTurns on or off the server function.1Select [Music Server Function] and press ENTER.2Select [On] and press ENTER.[Off] stops the server function entirely.Server Name

Sets the name of the server. The name appears on the client devices when they access the server.

1Select [Server Name] and press ENTER.2Enter a name using the on-screen keyboard.Client Registration

‘Client device’ refers to devices that support the music server function. You have the following registration methods.

1Select [Client Registration] and press ENTER.2Select an item and press ENTER.•Auto

Automatically registers up to 10 devices when accessed. This allows access to the server for all accessible devices on the network.

•ManualAllows for manual registration.

You can register a new device using the [Unregistered Device List], and cancel an existing registration using [Registered Device List].

Registered Device List

Displays the list of registered client devices. You can check the device information, or cancel the registration from this list.

1 Select [Registered Device List] and press ENTER.–If your device does not appear on the list, see [Unregistered Device List].

–To cancel all the displayed registrations, select [Clear]. And then select [Start] and press ENTER.

2Select the device you want to check and press ENTER. The device information appears.

To cancel the device’s registration, select [Delete Device] and press ENTER. Then select [Yes] when asked and press ENTER. The device name will be deleted from the list.

Unregistered Device List

Displays the list of accessible devices on the network that have not been registered yet. You can check the device information, or register a device from this list.

1Select [Unregistered Device List] and press ENTER.2Select the device you want to check. The device information appears.

To register the device as the server’s client, select [Register Device] and press ENTER. The device becomes ready for playback.

zHints

•If you do not want to manually register each client from the [Unregistered Device List], you can clear the list by selecting [Auto] in [Client Registration].

•See page 74, and refer to your client device manuals for more information on playback.

122