Sony HES-V1000 System Settings, Dim, Off, Dark, Note, Notes, Standard, HDMI Control, Standby Mode, Auto Display, Network Update, Software Update, Brightness of Front Panel

System Settings
	Settings
	Brightness of Front Panel	Bright
	HDMI Control	Off
The default settings are underlined.	Standby Mode	Standard
	Audio Display	On
	Software Update
Brightness of Front Panel	Bright

–Indicators and the top and front panel displays light up brightly.Dark–The indicators and the top and front panel displays light up dimly.Dim

–The top and front panel displays turn off when the power is off, and light up dimly when the power is on, although they turn off during playback of video, photo, and music.

		Note
		Setting to [Dim] does not turn off the indicators.
HDMI Control	On
		– Activates the function.
– Select whether to activate the HDMI Control
function of the server (page 24).		Off
		– Turns off the function.
Standby Mode	Standard

–There are two modes of operation that determine how fast the server becomes operable after you turn on the power.

–This mode uses (slightly) more electricity because the server is in a standby status even when turned off. For example, music and videos will start playing sooner when you press \/1, etc.

This is automatically selected if you set Music [Music Server Settings] to [On] in [Network Settings] (page 122).

Eco

– This mode uses less electricity because the power saving mode is enabled during standby mode.

For example, the ventilation fan does not rotate.

Notes

• [Standard] consumes more standby power as the internal controller carries current and rotates the ventilation fan.

• If [Eco] is selected, the server's music sharing function, and the music file transfer function from PCs cannot be used.

• When [Standard] is selected, the server can distribute or receive audio data even in standby

	mode. To use these functions while in standby mode, you will need to make additional settings
	on the client device or “Music transfer” on the PC.
	For “Music Transfer”: On the “File” menu, click [Select Server], and after selecting the server,
	click [Startup Server] (page 50)
	For client devices: Settings differ depending on the device. See instructions supplied with the
	device.
Auto Display	On
	– Displays the information at the time of change.
– When changing the viewing titles, picture
	Off
modes, audio signals, etc., you can check the
information about the change on screen	– Does not display the information automatically.
(name of the title, the picture mode or the
signal).
Software Update	Disc Update

–Updates the server software using a software update disc or connecting to the network.

– Updates the server's software using a software update disc. See “Updating the software using an update disc” (page 140) for details.

Network Update

–You can update by downloading the update data from the Internet. See “Updating the server’s software using the network” for details (page 141).

116