dRemove the lock stick.

A On the bottom of the unit (the same place as step 3), you should find a lock stick.

B Unlock the lock stick by turning the stick clockwise 90 degrees and remove it.

Store the lock stick in a safe place as you may need it when transporting the unit. The lock stick is necessary for securing the unit to the packing material to prevent damage of the mechanical block during shipment and transportation.

CClose the three holes (including the holes instep 3) with the supplied dust-tight seals.The dust-tight seals are included in the accessory box.

Dust-tight seals

ePlace the unit upright.

With two persons, bring the unit gradually into the upright position (pallet at the side).

Pallet

•Make sure to move the unit with at least two persons. The unit weighs 48 kg (105 3/4 lb).

•Move the unit slowly and carefully so the unit does not drop out and fall over.

•Refer to the above illustration so as not to hold the wrong side of the unit.

fRemove the pallet.A Remove the cushioning from the top of the unit.BRemove the pallet while another person is holding up the unit.

Pallet

gRemove the cover sheet, and place the unit.A Remove the white cover sheet.

20