DHolding the glass panel to the side, push the lever back to its original position.

The panel is locked.

Step 2: Checking the Accessories

 

1

 

The following items are supplied in the accessory pack:

2

• Audio/video cable (phono plug × 3) (1)

 

• LAN cable with Ferrite Clamp (Ferrite EMC Filter) (1)

 

• HDMI cable (1)
• Power cord (1)• Remote commander® (remote control) (1)• Size AA (R6) batteries (2)• Cleaning cloth (1)• Dust-tight seals (6)• “Music Transfer” installation CD (1)

Push the lever inside

Lever not engaged, panel not

 

 

 

firmly locked

 

 

 

 

 

 

Push the lever all the way through till it remains flush the back panel surface.

ERepeat steps 1 to 4 to attach the other panel.

Use the supplied cleaning cloth to wipe the glass surfaces. The cleaning cloth is included in the accessory pack.

Note

If the unit is brought director from a cold to a warm location, or is placed in a very damp room, moisture may condense on the unit. If this happens, leave the unit without connecting the power cord for about six hours, until the moisture evaporates.

Observe the following precautions when moving the unit.•Be sure to remove all discs before turning off the power.

•Attach the two lock screws and the lock stick to the unit. Be sure to disconnect the power cord when attaching them. Use the supplied carton and cushions for transportation.

22