,DTS audio signals on CDs and DVDs are output from the DIGITAL OUT (OPTICAL/COAXIAL) jack. And set [DTS] is set to [DTS] of [Audio Settings] in [Settings].

The sound is not output correctly.

,When the AV amplifier connected to the DIGITAL OUT (OPTICAL or COAXIAL) jack or the HDMI OUT jack does not support Dolby Digital signals, set [Dolby Digital] in [Audio Settings] to [Downmix PCM] (page 114).

,When the AV amplifier connected to the DIGITAL OUT (OPTICAL or COAXIAL) jack or the HDMI OUT jack does not support DTS signals, set [DTS] in [Audio Settings] to [PCM(BD-ROM)] (page 114).

,When the AV amplifier connected to the DIGITAL OUT (OPTICAL or COAXIAL) jack does not support signals recorded in 96 kHz frequency by its audio clock, set [48kHz/ 96kHz PCM] in [Audio Settings] to [48kHz/16bit]

(page 114).

The sound output from the AUDIO OUT (L/R) or LINE OUT AUDIO (L/R) jacks is distorted.

,Set [Audio Output ATT] in [Audio Setting] to [On] (page 114).

The disc does not play.

,The disc is turned over. Insert the disc with the playback side facing down.

,The disc is skewed.

,The server cannot play certain discs (page 148).

,The remote’s device selection is set for a device other than

SERVER.

,The region code on the BD/DVD does not match the server.

,Moisture has condensed inside the server (page 3).

,The server cannot play a recorded disc that is not correctly finalized (page 149).

,See “About Removable Media and Recording Modes” (page 148).

,Video CDs and Super Video CDs do not play on this server.

,The server is inclined (page 3).

The file name or contents information are not correctly displayed.

,Mixed mode CDs do not play on the server. (If audio of a music CD format multi-session CD is recorded in the first session, only the first session will be played.)

,See “About Removable Media and Recording Modes” on page 148.

No sound is output from the HDMI OUT jack

,The sound volume is low on some BDs/DVDs. The sound volume may improve if you adjust the [Audio DRC] setting in “BD/DVD Viewing Settings” (page 119).

,The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals).

The sound volume is low.

,On the Home Menu, select [Settings] – [Audio Settings], and set [Audio Output ATT] to [Off] (page 114).

Operation

The server does not become operable after the power is turned on. “E81XX” appears on the front panel display.

,Check that two lock screws and a lock stick are removed from the server's bottom (page 19).

Discs cannot be inserted.

,Check that two lock screws and a lock stick are removed from the server's bottom (page 19).

,Dual discs are not supported.

,Do not place multiple discs on the disc tray at the same time.

Discs do not eject after Z is pressed.

,Additional operations are required. See page 33 for procedures.

The remote does not function.

,The batteries in the remote are weak (page 27).

,There are obstacles between the remote and the server.

,The distance between the remote and the server is too far.

,The remote is not pointed at the remote sensor on the server.

The MP3 audio track file cannot be played (page 69).

, The DATA DVD is not recorded in the MP3 format that

 

conforms to UDF (Universal Disk Format).

 

, The audio track file does not have the extension “.MP3.”

 

, The data is not formatted properly even though it has the

 

extension “.MP3.”

 

 

, The data is not MPEG-1 Audio Layer III data.

Additional

 

, The server cannot play audio tracks in mp3PRO format.

 

, BD-REs/BD-Rs is recorded in a format other than UDF 2.5.

 

, The CD is a mixed mode CD.

 

 

 

Information

The LPCM audio track file cannot be played

 

, The DATA DVD is not recorded in the LPCM format that

 

conforms to UDF (Universal Disk Format).

 

, The audio track file does not have the extension “.WAV.”

 

, The data is not formatted properly even though it has the

 

extension “.WAV.”

 

, Characters other than numbers and English alphabet are

 

contained in the file name.

 

, Only audio track files of 44.1 kHz, 16 bit, and stereo, are

 

playable.

 

The file name or the content information are not correctly displayed.

,The server can only display numbers and English alphabet. Other characters may be displayed differently.

,Depending on the writing software used, the input characters may be displayed differently.

Playback stops automatically.

,While playing discs with an auto pause signal, the server stops playback at the auto pause signal.

Thumbnails do not appear.

,Thumbnails may not be created depending on the operation status or the recorded content.

,Play the title once, stop playback, and try again.

,continued

135