Installing the AIT Autoloader
The autoloader weighs about 7 kg (15.4 lb.) and has the following dimensions.
Before installing the autoloader, make sure that the surface is appropriate.
N
Note
Install the AIT autoloader on a horizontal surface near an AC power outlet. Also leave a gap of about 150 mm (5.9 in.) behind the rear of the unit to allow air to circulate.
220 mm (8.7 in.)
224 mm (8.8 in.)
(including rubber feet)
350 mm (13.8 in.)
170 mm
(6.7 in.)
Caution
Make sure that you position the AIT autoloader as indicated in the illustration.
Correct operation is not guaranteed if you place the AIT autoloader on its side.
50 mm (2.0 in.)
Rear
Front | 170 mm (6.7 in.) |
150 mm
(5.9 in.)
350 mm (13.8 in.)
50 mm (2.0 in.)
Chapter 2 Installation | 16 |
|
|