Sony LIB-D81 manual 49

Error code	Description	Display	Logged
	Detected calibration error	[L ] and [7 1] appear
71	(notch readings abnormal).	alternately on the message	Yes
		display.
	Detected calibration error.	[L ] and [7 2] appear
	(Upon calibration of the lower	alternately on the message
72	edge of the drive rim, it was	display.	Yes
	detected that it needed to be
	calibrated above the upper
	limit.)
	Because cartridge pickup	[L ] and [7 8] appear
	failed, when performing	alternately on the message
78	recovery it is impossible to do	display.	Yes
	so because there are no
	available slots.
	The door lock sensor does not	[L ] and [7 A] appear
7A	close when attempting to lock	alternately on the message	Yes
	the front door.	display.
	The door lock sensor does not	[L ] and [7 B] appear
7B	lock when attempting to lock	alternately on the message	Yes
	the front door.	display.
	The door lock sensor does not	[L ] and [7 C] appear
7C	unlock when attempting to	alternately on the message	Yes
	open the front door.	display.
	Detected a GAP when the	[L ] and [8 0] appear
80	elevator is in movement.	alternately on the message	Yes
		display.
	Cannot detect the normal	[L ] and [8 1] appear
81	number of notches when the	alternately on the message	Yes
	elevator is in movement.	display.
	The pulse of the last notch is	[L ] and [8 2] appear
82	determined to be ±xx mm out	alternately on the message	Yes
	of position when the elevator	display.
	is in movement.
	The pass sensor fails to	[L ] and [8 3] appear
83	change even if space between	alternately on the message
	notches is 1.5 times wider	display.	Yes
	when the elevator is in
	movement.
	Cannot detect the lower edge	[L ] and [8 8] appear
88	of the elevator during the	alternately on the message	Yes
	initialization MOVE.	display.
	Cannot detect the lower edge	[L ] and [8 9] appear
89	of the elevator during the	alternately on the message	Yes
	calibration MOVE (in Type	display.
	Drive).
	Cannot detect the notch edge	[L ] and [8 A] appear
8A	during the initialization MOVE.	alternately on the message	Yes
		display.
	Detected a GAP at the end of	[L ] and [9 0] appear	Yes
90	the picker movement.	alternately on the message
		display.
	Cannot detect the RVS sensor	[L ] and [9 1] appear
91	during picker movement.	alternately on the message	Yes
		display.
	Cannot detect the FWD	[L ] and [9 2] appear
92	sensor during picker	alternately on the message	Yes
	movement.	display.

Appendix 49