3 Eject the cartridge from the slot as illustrated below.

ERROR

WARNING

CLEANING

 

AIT LIBRARY LIB-D81

CLEAN

DOOR

Caution

The AIT autoloader contains a large number of wires and parts. Do not touch any part other than the slots inside the AIT autoloader as this may lead to damage and/or injury.

Note

If the cartridge that you want to eject in the AIT drive, see “Transporting the AIT Autoloader” (page 44) in the “Appendix”.

4 When you want to change cartridges, insert a new cartridge in the empty slot.

Make sure that you insert cartridges in the right direction, and push them in the AIT autoloader until you hear a click.

5 Close the front door.

When you hear the door click, it is closed. Make sure that the door clicks when you close it.

When the door is completely closed, the cartridges that you inserted into the AIT autoloader are counted and their number is displayed on the message display.

Caution

If cartridges protrude from slots or are otherwise improperly inserted into slots inside the AIT autoloader, the ERROR/WARNING LED lights orange and [0 1] appears on the message display, indicating an error, and the front door is automatically unlocked. Open the front door and correct any problems as necessary.

Chapter 4 Operating the AIT Autoloader

36