
For details about how to insert a cartridge into a slot, see “Setting Cartridges” (page 24) in Chapter 2, “Installation”.
ERROR WARNING
CLEANING
Cleaning cartridge
| AIT LIBRARY |
CLEAN | DOOR |
Caution
The AIT autoloader contains a large number of wires and parts. Do not touch any part other than the slots inside the AIT autoloader as this may lead to damage and/or injury.
3 Close the front door.
When you hear the door click, it is closed. Make sure that the door clicks when you close it.
When the door is completely closed, the cartridges that you inserted into the AIT autoloader are counted and their number is displayed on the message display.
Caution
If cartridges protrude from slots or are otherwise improperly inserted into slots inside the AIT autoloader, the ERROR/WARNING LED lights orange and [0 1] appears on the message display, indicating an error, and the front door is automatically unlocked. Open the front door and correct any problems as necessary.
4 On the front of the AIT autoloader, press the CLEAN button for at least three seconds.
Chapter 5 Cleaning the AIT Drive | 38 |
|
|