Product Features and Functions

Front

1

2

 

 

AIT LIBRARY LIB-D81

 

ERROR

CLEAN

DOOR

3

WARNING

 

 

CLEANING

 

 

6 5 4

7

AVentilation Holes

Be careful not to block the ventilation holes. If the ventilation holes are blocked, the AIT autoloader may overheat, resulting in damage.

BFront Door

Used in inserting and ejecting AIT cartridges. Press the DOOR button to unlock and open the door. The AIT autoloader cannot operate when the door is open, therefore when inserting or replacing a cartridge, be that the door is securely closed. When the door is closed it locks automatically.

CDOOR Button

Press to open the front door. Do not press this button while the AIT autoloader is operating.

DCLEAN Button

Insert the cleaning cartridge in slot CL/8 and press for at least three seconds to clean the AIT drive.

EMessage Display

The message display displays how many cartridges are in the AIT autoloader.

When in normal standby state, it displays the status of the AIT autoloader.

FERROR/WARNING LED

Lights or flashes orange when a specific operation is necessary or an error occurs. When it lights it indicates a warning, whereas when it flashes it indicates an error. When this happens, a 2-character code appears on the message display. For details about these codes, see “Error Code List” (page 47), “Other Messages” (page 52), or the code reference table.

GCLEANING LED

Flashes green when the AIT drive is in need of cleaning. For details about cleaning the AIT drive, see “Cleaning the AIT Drive” (page 37).

Chapter 1 Introduction

8