Iop DATA RECORDING AND DISPLAY WHEN OPTICAL
The Iop value labeled on the optical
Record Precedure:
1.While pressing the AMS knob and x/Z button, connect the power plug to the outlet, and release the AMS knob and x/Z button.
2.Rotate the AMS knob to display “[Service]”, and press the @/1 button.
3.Rotate the AMS knob to display “Iop Write” (C05), and press the @/1 button.
4.The display becomes “Ref=@@@.@” (@ is an arbitrary number) and the numbers which can be changed will blink.
5.Input the Iop value written on the optical
To select the number : Rotate the | AMS |
| knob. | ||
To select the digit : Press the |
|
|
| knob. | |
AMS | |||||
6.When the @/1 button is pressed, the display becomes “Measu=@@@.@” (@ is an arbitrary number).
7.As the adjustment results are recorded for the 6 value. Leave it as it is and press the @/1 button.
8.“Complete! !” will be displayed momentarily. The value will be recorded in the
9.Press the x/Z button to complete, remove the power plug to the outlet.
Display Precedure:
1.While pressing the AMS knob and x/Z button, connect the power plug to the outlet, and release the AMS knob and x/Z button.
2.Rotate the AMS knob to display “[Service]”, and press the @/1 button.
3. Rotate the AMS knob to display “Iop Read” (C26), and press the @/1 button.
4.“@@.@/##.#” is displayed and the recorded contents are displayed. @@.@ : indicates the Iop value labeled on the
##.# : indicates the Iop value after adjustment
5.To end, press the AMS button or x/Z button to display “Iop Read” (C26), remove the power plug to the outlet.
7
