Sony MEX-GS600BT operating instructions IPod, Playing back iPod

Notes

•Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection.

•Do not detach the front panel during playback of the USB device, otherwise USB data may be damaged.

Changing display items

Press .

Displayed items may differ depending on the USB device, recording format and settings.

Notes

•The maximum number of tracks is 10,000.

•It may take time for playback to begin, depending on the amount of recorded data.

•During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately.

•Playback of the following MP3/WMA/AAC files is not supported.

–lossless compression files

–copyright-protected files

–DRM (Digital Rights Management) files

–Multi-channel audio files

iPod

In these Operating Instructions, “iPod” is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations.

For details on the compatibility of your iPod, see “About iPod” (page 41) or visit the support site on the back cover.

Playing back iPod

Before connecting the iPod, turn down the volume of the unit.

1Connect the iPod to the USB port with the USB connection cable for iPod (not supplied)*.

* RC-100IP USB connection cable for iPod is recommended.

The tracks on the iPod start playing automatically from the point last played.

If an iPod is already connected, to start playback, press 

repeatedly until “USB” appears. (“IPD” appears in the display when iPod is recognized.)

To stop playback, press and hold  for 1 second.

To remove the iPod, stop the iPod playback, then remove the iPod.

14