S.WOOFER (Subwoofer)
SW LEVEL (Subwoofer Level) Adjusts the subwoofer volume level: “+10 dB” – “0 dB” –
SW PHASE (Subwoofer Phase) Selects the subwoofer phase: “NORM,” “REV.”
SW POS*1 (Subwoofer Position)
Selects the subwoofer position: “NEAR,” “NORMAL,” “FAR.”
LPF FREQ (Low Pass Filter Frequency) Selects the subwoofer
LPF SLOP (Low Pass Filter Slope) Selects the LPF slope: “1,” “2,” “3.”
HPF (High Pass Filter)
HPF FREQ (High Pass Filter Frequency) Selects the front/rear speaker
HPF SLOP (High Pass Filter Slope) Selects the HPF slope (effective only when HPF FREQ is set to other than “OFF”): “1,” “2,” “3.”
AUX VOL*5 (AUX Volume Level) Adjusts the volume level for each connected auxiliary equipment: “+18 dB” – “0 dB” –
This setting negates the need to adjust the volume level between sources.
BTA VOL (Bluetooth Audio Volume Level)*6 (page 29)
*1 Does not appear when “SET F/R POS” is set to “OFF.”
*2 Does not appear when the tuner is selected.
*3 When “SW DIREC” is set to “OFF.”
*4 When “RBE MODE” is set to “OFF.”
*5 When the AUX is selected.
*6 When Bluetooth audio source is activated.
DISPLAY:
DEMO (Demonstration)
Activates the demonstration: “ON,” “OFF.”
DIMMER
Changes the display brightness.
–“AT”: to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.)
–“ON”: to dim the display.
–“OFF”: deactivate the dimmer.
COLOR (Preset Color)
Selects the preset color of the display and buttons on the main unit (page 20).
Selects a preset color as a basis for further customizing (page 21).
SND SYNC
Selects the color with sound synchronization: “ON,” “OFF” (page 21).
WHT MENU
Sets the effect when the source is switched: “ON,” “OFF” (page 21).
START-WHT
Sets the start up color: “ON,” “OFF” (page 22).
AUTO SCR* (Auto Scroll)
Scrolls long items automatically: “ON,” “OFF.”
*When the CD, USB, Pandora® via USB, Bluetooth audio or Bluetooth Pandora® is selected.
BT (Bluetooth):
For details on setup items for the Bluetooth settings, see page 23.
37