Sony MEX-GS600BT Adjusting setup items, Using rear speakers as subwoofer Rear Bass Enhancer, Beep

Using rear speakers as subwoofer — Rear Bass Enhancer

Rear Bass Enhancer enhances the bass sound by applying a low pass filter setting (page 37) to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected.

1During reception/playback, press , rotate the control dial until “SOUND” appears, then press it.

2Rotate the control dial until “RB ENH” appears, then press it.

3Rotate the control dial until “RBE MODE” appears, then press it.

4Rotate the control dial to select from “1,” “2” or “3,” then press it.

5Press (BACK) to return to the previous display.

Using a subwoofer without a power amplifier

—Subwoofer Direct Connection

You can use the subwoofer without a power amplifier when it is connected to the rear speaker cord.

Note

Be sure to connect a 4 - 8 ohm subwoofer to either of the rear speaker cords. Do not connect a speaker to the other rear speaker cord.

1During reception/playback, press , rotate the control dial until “SOUND” appears, then press it.

2Rotate the control dial until “SW DIREC” appears, then press it.

3Rotate the control dial until “SW MODE” appears, then press it.

4Rotate the control dial to select “1,” “2” or “3,” then press it.

5Press (BACK) to return to the previous display.

For details on the settings for the subwoofer phase, position, low pass filter frequency and the low pass filter slope, see page 37.

Adjusting setup items

1Press , rotate the control dial until the desired category appears, then press it.

2Rotate the control dial until the desired item appears, then press it.

3Rotate the control dial to select the setting, then press it.*

The setting is complete.

4Press (BACK) to return to the previous display.

*For CLOCK-ADJ and BTM settings, step 4 is not necessary.

The following items can be set depending on the source and setting:

GENERAL:

CLOCK-ADJ(Clock Adjust) (page 7)

CAUT ALM*1 (Caution Alarm) Activates the caution alarm: “ON,” “OFF” (page 7).

BEEP

Activates the beep sound: “ON,” “OFF.”

AUTO OFF

Shuts off automatically after a desired time when the unit is turned off: “NO,” “30S (Seconds),” “30M (Minutes),” “60M (Minutes).”

35