– 7 –
• This set can be disassemble in the order shown below.
SECTION 3DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.

PANEL ASSY, REAR

Panel Assy, Rear
Set
Front Panel Section
Shutter Section
MD Mechanism Deck (MT-MZE800-170)
Display Panel, Liquid Crystal (LCD901)
Main Board OP Service Assy
(LCX-2E) “Motor, DC SSM17A/C-NP (Spindle) (M901)”,
“Motor, DC (Sled) (M902)” Holder Assy
2
claw
3
lid, battery case
holder assy
LCD flexible board
4
two MI screws (1.4)
5
panel assy, rear
4
two MI screws (1.4)
1
Open the battery case lid.
Note: In removing or mounting the rear panel, insert a disc into the
mechanism deck so as to keep the holder Assy in down position.
Note: In mounting the rear panel assy,
take care not to get entangled
with the LCD flexible board.