*For the mode numbers of 039 and 057, if the focus bias value is NG, the following display is repeated:
10.If the result of automatic adjustment is OK, the following dis- play appears:
55 30
Focus bias value
Mode No.
While P key is being depressed
77 01
Error code (01 to 04)
Meaning of focus bias
*For the mode numbers of 039 and 061, if the At error rate is NG, the following display is repeated:
39 03
At error value
Mode No. (lower two digits)
7.If NG, set the servo mode. Perform automatic adjustment for the items not accepted (see the servo mode).
8.Insert a MO disk.
9.Press ( key. The system discriminates between CD and MO and performs automatic adjustment for the MO disk.
61
|
|
| Mode No. (lower two digits) |
|
|
| |
• MO Automatic Adjustment | |||
|
|
|
|
Mode No. | Adjustment Description | ||
032 | MO read EF balance adjustment | ||
033 | MO read ABCD level | ||
034 | MO write EF balance adjustment | ||
035 | MO write ABCD level | ||
037 | MO focus gain | ||
038 | MO tracking gain | ||
061 | 32 cluster full recording | ||
062 | Recording shock | ||
063 | 32 cluster full playback | ||
039 | MO focus bias | ||
042 | Low refrection CD EF balance adjustment | ||
043 | Low refrection CD ABCD level | ||
044 | Laser low reflection CD read | ||
046 | Low refrection CD tracking gain | ||
00
11.If the result of automatic adjustment is NG, the following dis- play appears:
82 00
Result of adjustment
NG Mode No. (lower two digits)
12.If NG, set the servo mode. Perform automatic adjustment for the items not accepted (see the servo mode).
4-6. HYBRID MODE, KEY CHECK MODE
These modes are not used in normal service.
