To stop recording, press x.
The material that was recordedx up un

It is convenient for managing multiple

To activate the group mode

 

CD albums recorded in MDLP (LP2

stereo/LP4 stereo) mode onto a single

To record tracks in group mode, you must

MD.

first turn the group mode on before the

How is group information

start of recording.

 

 

recorded?

On the recorder

When recording in group mode, the group

information is written to the disc name

recording area.

1 Press GROUP for 2 seconds or mo

“ ” lights up and the group mode

This information consists of text strings

 

turns on.

that are written as shown in the following

example.

To cancel the group mode, press

GROUP for 2 seconds or more again.

 

Disc name recording area

Example

1 2 3

1Disc name: “Favorites.”

2Group name for tracks 1 to 5: “Rock”.

3Group name for tracks 6 to 9: “Pops”.

Therefore, the above character string is displayed in its entirety as the disc name if you load an MD recorded in group mode into a system that does not support group mode, or if you try to edit the contents of a disc on this recorder with the group mode turned off.

Note that if you perform the procedure for “Relabeling recordings” of “Labeling recordings” (page 59) and rewrite this character string by mistake, you may be unable to use the group function of that MD.

Notes

On the remote control

1 Press DISPLAY for 2 seconds or more, turn the control towards.

orN> until“GROUP” flashes in the display, and then press x.

2 Turn the control towards. or

N> until“GROUP ON” flashes in the display, and then press x.

“G” lights up in the display.

To cancel the group mode, select “GROUP OFF” in step 2.

Recording a track into a new group

1 While the recorder is stopped, pre GROUP for 2 seconds or more.

2 Press END SEARCH.

3 Press and slide REC to the right.

4 Play the source sound.

• The group function setting is stored even if you eject the MD or turn off the recorder.

• In group mode, the recorder treats all tracks

without group settings as belonging to the lastwas pressed is e group on the disc. The last group is indicated

in the display window on the recorder as

“Group --”. Within a group, the tracks appear in their order on the disc, not their order within the group.

31