If the following error messages flash in the display window, check the c
Error message Meaning/Remedy
BANK FULL • The name bank is almost full and cannot store the phrase you tried to enter.
,Delete some phrases from new phrase.
BLANKDISC• An MD with no recording on it is inserted.
BUSY | • You tried to operate the recorder while it was accessing the |
| recorded data. |
| ,Wait until the message g |
| few minutes). |
Data Save• The MD player is recording information (sounds) from the memory to the disc.
,Wait until this process to any physical shock, n
DISC ERR• The disc is damaged or does not contain proper recording or editing data.
,Reinsert the disc. If th
DISC FULL• The remaining recording time on the disc is 12 seconds (SP stereo), 24 seconds (LP2 stereo or monaural), 36 seconds (LP4 stereo), or less.
,Replace the disc.
EMPTY • You tried to erase data in the name bank but no data have been | ||
| recorded. | |
|
|
|
Hi DC in | • Voltage of the power supply is too high (The supplied AC power | |
| adaptor or the recommended car battery cord is not used). | |
| ,Use the supplied AC powe | |
| battery cord. | |
|
|
|
HOLD | • The recorder is locked. | |
| ,Slide HOLD against the a | |
| (page74). | |
|
| |
LINE OUT• You pressed VOL +/– while the “AUDIO OUT” parameter was set | ||
| to “LINE OUT.” | |
| ,Use the jog“AUDIOdialOUT” parameterto set | |
| “HeadPhone” (page 26). | |
|
|
|
LOW BATT | • Batteries are weak. | |
| ,Charge the rechargeable | |
| (page75). | |
84