Should any problem persist after you have made these checks, consult y dealer.
Symptom | Cause/Solution |
|
|
|
|
The recorder does• Audio sources may not be securely connected. |
| |
not work or works ,Disconnect the audio sour | ||
poorly. | (pages 22, 28). | |
| • The HOLD function is turned on (“HOLD” appears in the display | |
| when you press an operation button on the recorder). | |
| ,On the recorder, disable | |
| the opposite direction of | |
| • The lid is not firmly closed. | |
| ,Close the lid until it cl | |
| • Moisture has condensed inside the recorder. | |
| ,Take the MD out and leave | |
| several hours until the m | |
| • The rechargeable battery or dry battery is weak (“LOW BATT” | |
| flashes or nothing appears). | |
| ,Charge the rechargeable b | |
| the new one (page19), or | |
| adaptor to the recorder. | |
| • The rechargeable battery or dry battery have been inserted | |
| incorrectly. | |
| ,Insert the battery correc | |
| • You pressed a button while the disc indication was rotating quickly. | |
| ,Wait until the indication | |
| • When recording digitally from a portable CD player, you did not | |
| use AC power or did not disable the | |
| ||
| • The analog recording was made using a connecting cord with an | |
| attenuator. | |
| ,Use a connecting cord wit | |
| • The AC power adaptor was unplugged during recording or a power | |
| outage occurred. | |
| • While operating, the recorder received a mechanical shock, too | |
| much static, abnormal power voltage caused by lightning, etc. | |
| ,Restart the operation as | |
| 1 Disconnect all the power sources. | |
| 2 Leave the recorder for about 30 seconds. | |
| 3 Connect the power source. | |
| • The disc is damaged or does not contain proper recording or editing | |
| data. | |
| ,Reinsert the disc. Rereco | |
| appears, replace it with | |
|
|
|
79