,Set the power sources aga with new ones.
• The lid is not firmly closed.
,Close the lid until it cl
No sound• The comesheadphones/earphones plug is not firmly connected.
through ,Plugthe in the plug of the h headphones/remote control. Plug in t
earphonesi/LINE. OUT.
• Volume is too low.
,Adjust the volume–. by pres
• The plug is dirty.
,Clean the plug.
• The “AUDIO OUT” parameter for the i/LINE OUT ja “LINE OUT”.
,Set“HeadPhone”to .
• The power sources have been disconnected during recording or editing, or the battery have been exhausted.
The lid does not open.
There is• The noAC power adaptor was unplugged or a power outage occurred recordingduring recordingon the.
MD after a recording operation.
“NO SIGNAL” appears in the display when recording from a portable CD player.
• There is no digital signal from the portable CD player.
,Pause the recorder and ad
• A Premastered MD is inserted (“P/B ONLY” appears) when recording.
,Insert a recordable MD
• The recorder is operated when it is on a battery charging stand. ,Remove the recorder from
• You tried to turn the group mode on while setting the program. ,Turn the group mode on be
The recorder• The starting-position setting (“REC-Posi”) is set to “From overwritesHere”.
• Recording level is too small to record (when recording manually).
,Slide the tab (page77).
The recorder does• The disc is record-protected (“PROTECTED” appears). not work or works
poorly.
Cause/Solution
Symptom
80