Copying CD text information while recording (Joint Text)
CD text connecting cable, CD that support CD-TEXT, and CD player that support Joint Text required

1 Press and slide REC to the right t start recording on the recorder, a start playing the CD in the portab CD player.

“SYNC” and “REC” light up in the display.

“CD TEXT” appears for a few seconds, then “001 TEXT?” appears and “PushENTER” flashes in the display.

By connecting the recorder to a Sony “NO TEXT” appears at this time if no portable CD player that supports Joint track name information exists in the Text (the CD text copying function) (D- CD. In this case, the track name will

not be copied.

E999, etc.), you can copy track and disc

2

names automatically during recording. In

Press the jog dial.

addition to the CD text connecting cable

Track name scrolls, and then the

(RK-TXT1), make sure to connect the name appears“PushENTER”and recorder to the portable CD player with an

optical cable.

flashes in the display.

 

x

REC

Jog dial

 

To LINE IN (OPT) jack

To i/LINE OUT jack

RK-TXT1 (not supplied)

To i/

REMOTE jack

Portable CD player

(D-E999, etc.)

To LINE OUT

(OPTICAL)

 

 

jack

 

POC-15B etc.

 

(not supplied)

3 Press the jog dial.

Track name scrolls in the display while the name is copied.

4 Follow steps 2 and 3 to copy eac new track name that appears.

5 Pressx on the reco you want to st

“000 TEXT?” appears and “PushENTER” flashes in the display. If you don’t want to copy the disc

name information, press x again disc name is n operation ends

“NO TEXT” appears at this time if no disc name information exists in the CD. In this case, the operation ends without copying the disc name.

6 Press the jog dial.

Disc name scrolls, and then disc n appears and“PushENTER” flashes in

the display.

7 Press the jog dial.

“TOC Edit” flashes.

Afterwards, the disc name scrolls in the display.

40