Sony MZ-R909 01y 1m 1d 12:00am, Clock, Setting the clock to stamp the recorded time

4 Change the current year by turning the jog dial, and then press the dial.

The digit of the month flashes.

5 Repeat step 4 to enter the current month, date, hour, and minute.

When you press the jog dial to enter the minute, the clock starts operating.

01y 1m 1d 12:00am

Clock

Notes

• Make sure the time is correctly set if you want the time stamp to be accurately recorded for an important recording.

• Under normal conditions, the clock may vary by about plus or minus 3 minutes per month.

To display the time in the 24-

hour system

While setting the clock, press T MAR

To display the time in the 12-hour sys

press T MARK again.

1To maintain the correct time Press the jog dial while the recorder is

Once you set the clock, it will keep correct time

stopped.as long as the recorder is connected to a power

2 Turn the jog dial“OPTION”untilsource, such as the rechargeable battery,

flashes in the display, and then press alkaline dry battery, or AC power adaptor.

However, if no power source is connected, the

the dial.clock setting will change back to the factory

3 Turn the jog dial“CLOCKuntil SET” setting after about 3 minutes.

When changing the rechargeable battery or

flashes in the display, and then press alkaline dry battery, make sure to do it within 3

the dial.minutes. The digits of the year flash.

Jog dial

Press CANCEL, and set the clock aga from step 1. You can skip a step by

pressing the jog dial.

To stamp the date and time on the MD

when you record, you first need to set the

To display the current time

clock.When the recorder is not operating o Once you set the clock, the recorder will

while recording, press the jog dial, tu

include a time stamp each you record

the dial until“DISPLAY” appears in the

something. If you’t wantdonto include a display, and then press the dial again.

time stamp on the track, skip thisTurn the jog dial until “Clock” flashes in

operation.the display, and then press the dial again. The current time appears in the display.

Setting the clock to stamp the recorded time

If you make a mistake while setting the clock