Adding track marks automatically at specified intervals (Auto Time Stamp)

Using Auto Time Stamp to add track marks while recording

After you set the time interval in step the recorder will begin adding a trac mark whenever the time interval has elapsed. For example, if an Auto Tim

Use this feature to add track marksStamp interval of 5 minutes is set, an automatically at specified intervals minuteswhen of recording has already bee recording through the analog input done, then a track mark will be adde

connector or a microphone.

point equivalent to 13 minutes (8 + 5)

Jog dial

after the start of recording, and ever

minutes thereafter.

 

 

If, however, the Auto Time Stamp inte

 

is longer than the elapsed recording

 

then a track mark will be added whe

 

Auto Time Stamp interval has elapse

 

For example, if the Auto Time Stamp

 

interval is set at 5 minutes, but only

1

 

minutes of recording has been done,

While the recorder is recording or in

 

 

a track mark will be added at the 5-m

 

recording pause, press the jog dial.

2

 

point after the start of the recording,

Turn the jog dial“TIMEuntil

every 5 minutes thereafter.

 

MARK” flashes in the display, and

z

 

then press the dial.

3

“T” appears before the time display on the

 

recorder for track marks added by Auto Time

Turn the jog dial until the desired

 

 

Stamp, and “T” appears after the time display

time interval flashes in the display.

on the remote control.

Select one of the following intervals.

 

 

Notes

Display

Time

• Automatic track marking by Auto Time Stamp

 

 

starts when you add a normal track mark to

OFF

—

the disc (i.e., by pressing T MARKX,or

 

 

5 min. ON

Approx. 5 min.

etc.).

 

 

• The setting will be lost when the recording

10 min. ON

Approx. 10 min.

stopped.

 

 

15 min. ON

Approx. 15 min.

 

 

 

 

4 Press the jog dial.

To cancel Auto Time Stamp Select“OFF” in step 3, and then press the jog dial, or stop recording.

35