Sony MZ-R909 STR, END:001, Registering tracks or groups as a new group (Group setting)

Follow steps 4 to“Labeling 7 of recordings” (page 55) to label a group.

Registering tracks or groups as a new group (Group setting)

2 Turn the jog dial“until: Set” flashes in the display, and then press the jog dial.

“001” flashes in the display.

Do the following procedure to register STR:001

tracks (or groups). A series of tracks (orEND:001 groups) can be registered by selecting the:

starting and ending tracks (or groups). The tracks (or groups) must, however, be

sequential. If the desired tracks (or 3 Turn the jog dial until the number groups) are not consecutive, you must name of the desired first track fla move them to make them consecutive in the display, and then press the

before you can register“Moving them (														dial.
recorded tracks”, page 64). This function														This selects the first track of the
can be used at any time, whether group														group.
mode is on or off.														Even when the group mode is on,
							Group					Group		track numbers appear according t
														their order on the disc, not their o
	1	2	3	4		5		6	7		8		9	within the group.
														4 Turn the jog dial until the number
	Making a new					Making a new group								4 Turn the jog dial until the number
	group with					with 2 groups.								name of the desired last track flas
	tracks 1 to 3.													in the display, and then press the
	Group							Group						dial.
														This selects the last track of the n
	1	2	3		4	5		6		7	8		9	This selects the last track of the n
	1	2	3		4	5		6		7	8		9	group.

• Registration of non-consecutive tracks 5 is not possible (for example, the 1, 3, 2, 4, 3, 5, 6, 6, 8 and then 9).

	• Tracks always appear according to theirNotes
	order on the disc, not their order within	• In step 3, the first track must either be the first
	the group (even when group mode is	track of an existing group or a track that does
	on).	track of an existing group or a track that does
	on).	not belong to a group.
	Jog dial	• When selecting the last track in step 4, make
		sure the track comes after the one selected in
		step 3. The last track must either be the last
		track of an existing group or a track that does
		not belong to a group.

1 While the recorder is stopped, press the jog dial, turn the dial“EDIT”until flashes in the display, and then press

the dial again.