Error message | Meaning/Remedy |
|
|
MEM OVER | • You tried to record with the recorder placed where it receives |
| continuous vibration. |
| , Put the recorder on a stable place, and start recording again. |
|
|
MENU | • You pressed a key on the remote control while selecting a menu on |
| the recorder. You pressed a key on the recorder while selecting a |
| menu on the remote control. |
|
|
NAME FULL | • You tried to enter more than 200 letters to label a single track or |
| disc. |
| • You tried to enter a total of more than 1700 letters for track or disc |
| names. |
| ,Enter a shorter name for the track, group, or disc (page 55), or |
| set the “LP Stamp” setting to “Stamp OFF” so that “LP:” is not |
| added at the beginning of the track name (page 29). |
|
|
NO BATT | • The rechargeable battery is not inserted. |
| ,Insert a rechargeable battery. |
|
|
NO COPY | • You tried to make a copy from a disc that is protected by the Serial |
| Copy Management System. You cannot make copies from a |
| digitally connected source which was itself recorded using digital |
| connection. |
| ,Use analog connection instead (page 22). |
|
|
NO DISC | • You tried to play or record with no disc in the recorder. |
| ,Insert an MD. |
|
|
No Entry! | • You tried to erase a setting in the Personal Disc Memory on a disc |
| that contains no settings in the Personal Disc Memory. |
|
|
NO SIGNAL | • The recorder could not detect digital input signals. |
| ,Make sure that the source is connected firmly (page 22). |
|
|
NO TEXT | • You tried to use the CD text copying function to copy a track or |
| disc name from a CD that has no text data (page 40). |
|
|
P/B ONLY | • You tried to record or edit on a pre mastered MD (P/B stands for |
| “playback”). |
| ,Insert a recordable MD. |
|
|
PROTECTED | • You tried to record or edit on a MD with the tab in the record- |
| protect position. |
| ,Slide the tab back (page 77). |
|
|
85