WALKMAN User Guide
Getting Started
How to Use the Software
Music
“SensMe™ Channels”
Videos/Podcasts/Photos
FM Radio
Timer
Settings
Troubleshooting
Important Information
Specifications
Contents list
Top page > Getting Started > Power/Charging > Turning the player on and off
Turning the player on and off
To turn on the player
To turn off the player
OPTION/PWR OFF button HOLD switch
If 
appears on the top of the screen, slide the HOLD switch in the opposite direction of
the arrow 
on the right side of the player to cancel the HOLD function.
To turn on the player
Press any button to turn the player on.
To turn off the player
Press and hold the OPTION/PWR OFF button [Details]. [POWER OFF] appears, the player enters standby mode, and the screen turns off.
Hint
Set the date and time on the player before using it [Details].
During pause, if there is no operation for about 10 minutes, the player automatically enters standby mode, and the screen turns off. In standby mode, press any button to turn on the screen again.
While the player is in standby mode, if there is no operation for about a day, the player completely turns off automatically.
Note
You cannot operate the player when it is connected to a computer. Disconnect the USB cable before operating the player.
After connecting to a computer with the USB cable, the resume information of the last played song, video, photo, etc., is cleared. Reselect the desired content from the list screen. The player consumes battery power very slightly even when it is in standby mode. Therefore, the player might unexpectedly turn off completely, depending on the power remaining in the battery.
Back to top
Copyright 2010 Sony Corporation
27
