n N
77
Network Media Receiver | Troubleshooting |
About connecting to a server
Cannot connect to a server
❑Make sure the VAIO computer(s) are turned on.
❑Make sure the network settings are configured correctly.
❑Confirm the following, if applicable to your network environment:
❑A crossover cable is used for a direct connection between the Network Media Receiver and a single VAIO computer.
❑The network switch or the router device is turned on (see the information supplied with your network switch or router device for details).
❑The router device is turned on before turning on the Network Media Receiver.
❑The Network Media Receiver, network switch, or router device are properly connected using the appropriate network cables*.
❑If using a router device, the Network Media Receiver and the VAIO computer have been configured to obtain the IP address automatically.
❑The correct server name appears in the Select a server screen (the Select a server screen lists all current and previous servers connected to the Network Media Receiver). If the server still does not appear in the Select a server screen, turn off the Network Media Receiver and disconnect then reconnect the AC adapter. Turn on the Network Media Receiver again and check that the server appears in the Select a server screen.
❑To use the automatic resume feature**, the VAIO computer must be in Standby or Hibernate mode.
❑Verify that the IP address of the Network Media Receiver is obtained properly. If using a router device, the Network Media Receiver and the VAIO computer must be configured to obtain the IP address automatically. If Obtain the IP address automatically is specified in the IP Address screen, an IP address is shown in the IP Address screen.
❑VAIO Media Integrated Server is running.
❑The VAIO computer may have become unstable. Turn off and restart the VAIO computer.
*Use network cables that support
**The Network Media Receiver automatically brings the VAIO computer out of Standby or Hibernate mode.
