rAudio monitor channels

 

 

This displays the audio monitor channels, as set with

 

 

MONI CH and MONI SEL on the HOME page of the

 

 

function menu (see page 75).

 

 

 

When you are monitoring channels 1 and 2 (MONI CH is

 

 

 

 

 

set to “CH 1/2”), the display changes as follows,

 

 

 

 

 

Chapter

 

depending on the setting of MONI SEL.

 

 

 

 

MONI SEL setting

Display

1

 

MONO L (monaural L)

1

1

Overview

 

 

 

 

 

 

MONO R (monaural R)

2

2

 

 

 

 

 

 

 

 

 

STEREO

1

/ 2

 

 

 

 

 

 

 

MIX

1

+ 2

 

 

 

 

 

2Audio level adjustment section

1 CH 1 to CH 4 knobs

2 VARIABLE switch

CH 1

 

CH 2

 

CH 3

 

CH 4

 

 

 

PRESET

PB

aCH 1 to CH 4 (audio level) knobs

Depending on the setting of the VARIABLE switch, these adjust the input audio or playback audio levels of CH 1 to CH 4.

bVARIABLE (audio level adjustment selector) switch

This selects whether or not the playback audio has the levels adjusted by the CH 1 to CH 4 knobs.

PRESET: The playback audio levels are fixed at preset values.

PB: Adjust the playback audio levels.

3Arrow buttons

The four arrow buttons are also used as the MARK1 button, MARK2 button, IN button, and OUT button, as follows.

Mbutton: MARK1 button m button: MARK2 button < button: IN button , button: OUT button

You can use these buttons for menu setting operations, thumbnail selection, setting or deleting In/Out points, and so on.

1</IN button and ,/OUT button

 

MARK1

 

IN

 

OUT

 

 

2 M/MARK1 button and m/MARK2 button

 

MARK2

3 IN indicator and OUT indicator

 

 

a</IN button and ,/OUT button

When the setup or disc menu is visible, use these buttons to change menu settings. When the THUMBNAIL button is lit, you can use these for thumbnail selection.

An In or Out point is set when you press the SET button with the </IN or ,/OUT button held down. The In or Out point setting is deleted when you press the RESET button with the </IN or ,/OUT button held down.

bM/MARK1 button and m/MARK2 button

When the setup or disc menu is visible, use these buttons to change menu settings. When the THUMBNAIL button is lit, you can use these for thumbnail selection.

During recording and playback, the M/MARK1 or m/ MARK2 button can be pressed with the SET button held down to record a SHOT MARK1 or SHOT MARK2 as an essence mark.

To delete or change essence marks, use the supplied PDZ- 1 Proxy Browsing Software.

cIN indicator and OUT indicator

IN indicator: This lights when an In point exists. It flashes if an attempt is made to set an In point after a recorded Out point.

OUT indicator: This lights when an Out point exists. It flashes if an attempt is made to set an Out point before a recorded In point.

4Shuttle/jog/variable-speed playback control block

4Jog/shuttle transport indicators

VAR

1VAR button

JOG

2JOG button

SHUTTLE

3 SHUTTLE button

5Jog dial

6Shuttle dial

For details about playback operations with these buttons and dials, see page 41 “Playback” in Chapter 3.

16 Names and Functions of Parts