Sony PDW-F30 Disc Menu, Disc Menu Operations, To display the status of the current disc or clip

Press the ,/OUT button.

Display the disc menu (see page 77).

The setting returned to its factory default is saved in memory as the current setting.

To return all settings to their factory default settings

1 Display the setup menu.

2 Press the RESET button.

A message appears, to confirm whether or not you wish to return all settings to their factory default settings.

Message in the monitor	Initialize all items to factory
video section	preset values?
Message in the time	Init setup?
data display

3 Press the SET button.

The message “NOW SAVING...” appears in the monitor video section, and “Saving...” appears in the time data display, while the settings of all items are returned to their factory default settings. These factory default settings are saved in memory.

Note

If you power off the unit while settings are being saved, settings may not be correctly returned to their factory default settings. Wait until the saving is completed before powering off the unit.

To abandon the resetting operation

Instead of pressing the SET button, press the RESET button.

The display returns to the top level of setup menu, leaving the settings unchanged.

DISC MENU

STATUS

DELETE

FORMAT

The disc menu contains the following items. Characters and symbols inside the brackets [ ] appear in the time data display section.

STATUS [Status] Displays disc or clip status.

DISC [> Disc]: Displays the DISC STATUS screen.

CLIP [> Clip]: Displays the CLIP STATUS screen.

Note
The PDZ-1 Proxy Browsing Software allows you to write
TITLE1 and TITLE 2 to the disc, but only TITLE1 appears
here.
DELETE [Delete]
Deletes clips from the disc.
LAST CLIP [> Last Clip]: Deletes the most recently
	recorded clip.
ALL CLIP [> All Clip]: Delete all clips. (Clips in the
		6Chapter
FORMAT [Format]
	General directory are not deleted.)
Formats a disc.		Menus
QUICK FORMAT [>Quick Format]: Deletes all
	data on the disc, including the contents of the
	General directory.

Disc Menu

Use the disc menu to delete data on discs and to format discs.

For the method of displaying the disc menu, see “Displaying the Setup and Disc Menus” (page 77).

Disc Menu Operations

To display the status of the current disc or clip

Insert a disc, and then proceed as follows.

1

2 Press the M/MARK1 button or m/MARK2 button to select STATUS.

3

4 Select DISC or CLIP and press the ,/OUT button.

If you selected DISC, the status of the loaded disc appears.

System Menu 89