Menus 6 Chapter
INTERFACE SELECT [Interface]: Settings related to | Description |
interfaces |
|
WIRELESS RMT [> Wireless]: Enable or disable operation | DISABLE [>> DISABLE]: Disable. |
from the wireless remote commander. | *ENABLE [>> ENABLE]: Enable. |
|
|
|
|
METADATA [Metadata]: Metadata settings | Description |
INDEX POSITION [> Index Pos]: Specify which frame to use | 0SEC [>> 0 sec] to 10SEC [>> 10 sec]: The frame at 0 |
as the thumbnail image (index picture) when recording. | seconds to 10 seconds from the top of the clip, specified in |
| units of 1 second. |
| Factory default setting: *0SEC |
|
|
STORE OWNER [> Ownership]: Create UMID owner | The STORED OWNERSHIP screen appears. |
information. | For details, see Appendix “Setting UMID ownership |
| |
| |
|
|
DATA ITEM OUT [> DATA ITEM]: Specify whether to include | OFF [>> OFF]: Do not include VANC packet information in |
the information from extracted VANC packets in data | data items. |
items. | *ON [>> ON]: Include VANC packet information in data items. |
|
|
|
|
SETUP BANK OPERATION [Setup Bank]: Settings related | Description |
to menu bank operations |
|
|
|
Menu bank: This unit allows three different complete sets of menu settings to be saved in what are termed “menu banks” numbered 1 to 3.
RECALL BANK 1 [> Recall 1]: Recall menu settings from | Operate with the following procedure. | |
menu bank 1. | (1) Select the bank you want to recall, then press the ,/OUT | |
| button. | |
RECALL BANK 2 [> Recall 2] :Recall menu settings from | ||
Message “RECALL OK?” appears. | ||
menu bank 2 | ||
(2) To recall, press the SET button. | ||
| ||
RECALL BANK 3 [> Recall 3]: Recall menu settings from | To quit recalling, press the RESET button | |
menu bank 3. |
| |
|
| |
SAVE BANK 1 [> Save 1]: Save current menu settings to | Operate with the following procedure. | |
menu bank 1. | (1) Select the bank you want to save, then press the ,/OUT | |
| button. | |
SAVE BANK 2 [> Save 2]: Save current menu settings to | ||
Message “SAVE OK?” appears. | ||
menu bank 2. | ||
(2) To save, press the SET button. | ||
| ||
SAVE BANK 3 [> Save 3]: Save current menu settings to | To quit saving, press the RESET button. | |
menu bank 3. |
| |
|
| |
|
| |
MENU GRADE [Menu grade]: Selection of menu items to | Description | |
be displayed |
| |
Determine whether to display basic items only or both basic | *BASIC [>> Basic]: Display basic items only. | |
and enhanced items in the monitor video section and the time | ENHANCED [>> Enhanced]: Display both basic and | |
data display section when using the setup menu. | enhanced items. | |
|
|
Setup Menu Operations
This section explains how to change menu settings.
Buttons used to change settingsUse the following buttons to change menu settings.
Menu control buttons | Functions | |
MENU button | • | Display and hide the menu. |
| • | Return to the menu from |
|
| setting screens. |
|
|
|
Menu control buttons | Functions |
M/MARK1 and m/MARK2 | These buttons move the |
buttons | highlighted cursor up and down |
| within the current level to select |
| an item or setting. Hold down |
| one of these buttons to make |
| the highlighted cursor move |
| continuously. |
|
|
</IN and ,/OUT buttons | Press the ,/OUT button to go |
| down one level. |
| Press the </IN button to go |
| up one level. |
| Hold down one of these |
| buttons to make the highlighted |
| cursor move continuously. |
|
|
86 System Menu