| TIME CODE [Time Code]: Settings related to the timecode |
| Description | ||
| generator |
|
|
| |
| VITC POS |
| When the system frequency is 60i, 23.98P or 30P | ||
| VITC in. |
| 20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line | ||
|
|
|
| from 12 to 20. | |
|
|
|
| Factory default setting: *16 LINE [>> 16 line] | |
| Note |
|
| ||
|
|
|
|
| |
| You can insert the VITC signal in two places. To insert it in two |
|
|
| |
| places, set both this item and VITC POS |
| Note | the system frequency is 60i, 23.98P, or 30P, the VBID | |
|
|
|
| When | |
|
|
|
| (Video Blanking ID) receives priority over a selection of | |
|
|
|
| “20LINE”. | |
|
|
|
| When the system frequency is 50i or 25P | |
|
|
|
| 22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from | |
|
|
|
| 9 to 22. | |
|
|
|
| Factory default setting: *19 LINE [>> 19 line] (line 19) | |
|
|
|
| ||
| VITC POS |
| When the system frequency is 60i, 23.98P or 30P | ||
| VITC in. |
| 20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line | ||
|
|
|
| from 12 to 20. | |
|
|
|
| Factory default setting: *18 LINE [>> 18 line] | |
| Note |
|
| ||
|
|
|
|
| |
| You can insert the VITC signal in two places. To insert it in two |
|
|
| |
| places, set both this item and VITC POS |
| Note | the system frequency is 60i, 23.98P, or 30P, the VBID | |
|
|
|
| When | |
|
|
|
| (Video Blanking ID) receives priority over a selection of | |
|
|
|
| “20LINE”. | |
|
|
|
| When the system frequency is 50i or 25P | |
|
|
|
| 22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from | |
|
|
|
| 9 to 22. | |
|
|
|
| Factory default setting: *21 LINE [>> 21 line] (line 21) | |
|
|
|
| ||
| PD PRESET [> PD preset]: Select the timecode to preset. |
| 24F TC [>> 24F TC]: Preset | ||
| The |
| 30F TC [>> 30F TC]: Preset | ||
|
|
|
| ||
|
|
|
|
|
|
| DISC PROTECTION [Disc protct]: Settings related to disc |
| Description | ||
| protection |
|
|
| |
| STILL TIMER [>> STL timer]: Specify the length of time the |
| 0.5SEC [>>> 0.5 sec] to 30MIN [>>> 30 min]: Select time | ||
| unit can be in still image mode before switching to disc |
| from 16 settings ranging from 0.5 second to 30 minutes. | ||
| protection mode. |
| Factory default setting: *8MIN [>>> 8 min] (8 minutes) | ||
|
|
|
| ||
|
|
|
|
|
|
| VIDEO CONTROL [Video]: Settings related to video |
| Description | ||
| control |
|
|
| |
| INT VIDEO SG [> Video SG]: Select the test signal to be |
| *100% COLOR BARS [>> 100% bars]: 100% color bar signal | ||
| output from the internal test signal generator. |
| RAMP(Y/C) [>> Ramp]: Bias signal | ||
|
|
|
| GRAY [>> Gray]: Grayscale signal | |
|
|
|
| BLACK BURST [>> BB]: Black burst signal | |
|
|
|
| ||
| SETUP ADD [> Setup add]: Select whether to add black |
| *OFF [>> OFF]: Do not add setup. | ||
| setup to the composite video output signal. |
| ON (ADD) [>> ON]: Add setup. | ||
|
|
|
| ||
| CC (F1) BLANK [> CC1 blank]: Select whether to suppress |
| *OFF [>> OFF]: Suppress. | ||
| the closed caption signal to be superimposed on the 1st |
| ON [>> ON]: Do not suppress. | ||
| field of the output video signal. |
|
|
| |
|
|
|
|
| |
| Note |
|
|
|
|
| When | you play back a disc with a recorded closed caption |
|
|
|
| signal, the closed caption signal is multiplexed into composite |
|
|
| |
| output only. |
|
|
| |
|
|
|
|
|
|
Menus 6 Chapter
System Menu 83