Selection Scene 4 Chapter
You can use a trimming operation (see page 62) to change In and Out points set by the quick scene selection function.
|
|
|
|
|
|
|
|
| 2,3,4 |
| 2,3 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| EJECT |
|
| 0 |
| 0 |
| TCG | F1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
| EXT |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| TC MODE | F2 |
|
|
|
|
|
|
|
|
| ||
ACCESS |
|
|
| PRESET |
|
|
|
|
|
|
|
|
|
| ||
|
|
| RUN MODE | F3 |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| 1 | 2 | 3 | 4 |
| REC RUN |
|
|
|
|
|
|
|
|
| VAR |
NETWORK |
| 4CH 16 BIT | 3 + 4 | T C / V I T C |
|
|
|
| MENU |
|
| MARK1 |
| |||
| F4 | CHAPTER |
|
|
|
|
|
| ||||||||
| MPEG HD | SP | 1080 60I |
| V I T C |
|
|
|
|
|
|
|
| |||
LOCAL |
|
| VITC | COOO1 | REM:077M | DF/NDF |
|
|
|
|
|
|
|
|
|
|
REMOTE | 00:00.00:00 | NDF | F5 | EXPAND | SUB | THUMB | SET | RESET | IN |
| OUT |
| ||||
LEVEL | P2 |
|
| CLIP | NAIL |
|
|
| JOG | |||||||
|
|
|
|
|
|
| PAGE DISPLAY |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| CLIP | ESSENCE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MENU | MARK |
|
|
| MARK2 |
|
|
PHONES |
| CH 1 |
| CH 2 | CH 3 | CH 4 |
| KEY INHI | PREV | PLAY | NEXT | STOP |
| TS REC | SHUTTLE | |
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
| PRESET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PB | SHIFT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TOP | F REV | F FWD END | STANDBY |
|
| |||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| 4 |
|
|
| 1 |
|
|
| 1 |
1 With the SUB CLIP button off, and the clip displayed in
To display the desired clip in
If the thumbnail screen is displayed, use the arrow buttons or jog dial to select the clip to display in full- screen mode, and then press the SET button.
To search
Use the jog and shuttle dials.
2 At the point you want to set as the In point, hold down the </IN button and press the SET button.
An In point is set, and the IN indicator lights. If the unit is set up to superimpose character information on the display (see page 32), the In point timecode appears.
3 In the same way, search for the point you want to set as the Out point, and then hold down the ,/OUT button and press the SET button.
An Out point is set, and the OUT indicator lights. If the unit is set up to superimpose character information on the display (see page 32), the Out point timecode appears.
To check the In point or Out point
The timecode of the In or Out point that you have set appears when you press the </IN button or the ,/ OUT button. An image of the In point is cued up if you hold down the </IN button and press the PREV button or NEXT button. An image of the Out point is cued up if you hold down the ,/OUT button and press the PREV button or NEXT button.
To check the duration
Hold down the </IN button and the ,/OUT button at the same time.
The duration appears on the screen.
To reset an In point or Out point
With the </IN button or ,/OUT button held down, press the RESET button.
4 Holding down the SHIFT button, press the SET button.
The section between the In point and Out point is added to the end of the current clip list as a sub clip.
When you set In and Out points stretching across several clips
One sub clip is created for each of the clips.
Clips recorded on the disc
| Clip 1 | Clip 2 | Clip 3 | |
|
|
|
|
|
In point |
| Out point | ||
|
|
|
|
|
| Sub clip 1 | Sub clip 2 | Sub clip 3 |
|
|
|
|
|
|
5 Repeat steps 1 to 4 until you have added all of the clips you want to the current clip list.
6 Save the current clip list to disc.
For details, see “Saving the Current Clip List to Disc” (page 64).
60 Creating Clip Lists