Sony PDW-F30 Assigning Sequence Numbers to Thumbnails

Playback and Recording 3 Chapter

To cancel the deletion and return to the CLIP MENU

Select “CANCEL”, and then press the SET button. Press the RESET or MENU button.

5 Use the V/MARK1 button to select “OK”, and then press the SET button.

The clip is deleted and you return to the thumbnail screen.

To go to the clip deletion screen without displaying the CLIP MENU

After step 2, press the RESET button with the SHIFT button held down (shortcut operation).

The clip deletion screen appears directly, without displaying the CLIP MENU.

To delete all clips

1 Carry out steps 1 and 3 of “Deleting Clips” to display the CLIP MENU.

2 Use the V/MARK1 or the v/MARK2 buttons to select “LOCK OR DELETE ALL CLIPS”, and then press the b/OUT button.

A sub menu appears.

3 Select “DELETE ALL CLIPS”, and then press the SET button.

A deletion confirmation screen appears.

4 To execute the deletion, use the V button to select “OK”, and then press the SET button.

All clips are deleted.

However, locked clips are not deleted.

If all clips have been deleted, you return from the thumbnail screen to the original screen.

Assigning Sequence Numbers to Thumbnails

You can assign sequence numbers to displayed thumbnails.

1 With the SUB CLIP button off, press the THUMBNAIL button, turning it on.

Thumbnails of the clips on the disc appear.

2 Press the MENU button.

The CLIP menu appears.

3 Use the V/MARK1 button to select “CLIP INFORMATION”, and then press the SET button.

A sub menu appears.

4 Use the v/MARK2 button to select “SEQUENCE NUMBER”, and then press the SET button.

As shown in the following figure, sequential numbers are assigned to thumbnails.

50 Playback