Menu control buttons | Functions | |
RESET button | • | Returns the setting to the |
|
| factory default setting. |
| • | Answer “No” to the question. |
|
|
|
SET button | • | Saves the new setting in |
|
| memory. |
| • | Answer “Yes” to the question. |
|
|
|
The factory default setting is to display only the basic items. To change the settings of basic items, proceed as follows.
1 Press the M/MARK1 or m/MARK2 button to select the required item.
Example: Screen display when DISPLAY
CONTROL is selected
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
SETUP BANK OPERATION
MENU GRADE | :BASIC |
2 Press the ,/OUT button.
This displays menu level 2 for the menu item selected in step 1.
Example: Screen display of the second level of the DISPLAY CONTROL menu
SETUP MENU
DISPLAY CONTROL |
|
|
|
|
|
CHARA.DISPLAY |
| :ON |
| ||
|
|
|
|
|
|
CHARA.POSITION |
|
|
|
|
|
CHARA.TYPE |
| :WHITE |
| ||
CHARA.VSIZE |
| :x1 |
| ||
DISPLAY INFO |
| :T&STA |
| ||
SUB STATUS |
| :OFF |
| ||
MENU DISPLAY |
| :WHITE |
| ||
BRIGHTNESS |
| :55% |
| ||
ALARM |
| :ON |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Current |
| setting | ||
|
| ||||
3 Press the M/MARK1 or m/MARK2 button to select the required item.
For menu items on level 3, press the ,/OUT button to go to level 3, then press the M/MARK1 or m/ MARK2 button to select the item whose setting you wish to change.
Example: Screen display when SUB STATUS is selected
SETUP MENU |
|
DISPLAY CONTROL |
|
CHARA.DISPLAY | :ON |
CHARA.POSITION |
|
CHARA.TYPE | :WHITE |
CHARA.VSIZE | :x1 |
DISPLAY INFO | :T&STA |
|
|
SUB STATUS | :OFF |
MENU DISPLAY | :WHITE |
BRIGHTNESS | :55% |
ALARM | :ON |
|
|
4 Press the ,/OUT button.
This displays all possible settings for the item selected in step 3.
| SETUP MENU |
|
DISPLAY CONTROL |
| |
SUB | STATUS | :OFF |
|
|
|
* | OFF |
|
| TC MODE |
|
| REMAIN |
|
| CLIP NAME |
|
|
|
|
5 Press the M/MARK1 or m/MARK2 button to change the setting of the item.
| SETUP MENU |
|
DISPLAY CONTROL |
| |
SUB | STATUS | :OFF |
* | OFF |
|
|
|
|
| TC MODE |
|
| REMAIN |
|
| CLIP NAME |
|
|
|
|
6 To change other settings, press the </IN button to return to the previous screen, then repeat steps 3 to 5 as required.
7 When you have completed the settings, press the SET button.
The message “NOW SAVING...” appears in the monitor video section, and “Saving...” appears in the time data display section, while the new settings are saved in memory.
When the saving operation is completed, the monitor video section and time data display section return to their normal indications.
Menus 6 Chapter
System Menu 87