See “Using PDZ-1 Proxy Browsing Software” in Chapter 4 (page 68) for more information about installing the PDZ-1 software. See the online help of PDZ-1 for more information about using PDZ-1.

Some limitations apply to FAM connections. For details, see “File Operations in File Access Mode” in Chapter 5 (page 72).

 

 

 

PDW-F30 (this unit)

COMPOSITE OUT

AUDIO MONITOR

 

-AC IN

 

 

R L

 

POWER

 

 

 

 

 

AUDIO OUTPUT

 

 

 

1/3

2/4

 

 

 

 

MONITOR

RS232C

REMOTE(9P)

S400

 

 

 

 

S400

i.LINK cable (not supplied)

i.LINK (IEEE1394) connector Laptop computer

On the computer

On this unit

Install PDZ-1.

Set the setup menu item

 

INTERFACE SELECT >i.LINK

 

MODE to “FAM(PC REMOTE)”

 

(see page 85).

 

 

Connecting to a Nonlinear Editing System (AV/C Connection)

You can send video/audio signals (AV/C data) from this unit to a nonlinear editing system connected to the S400 connector.

The following figure shows an example connection.

See “Using PDZ-1 Over an i.LINK Connection (FAM Connection)” (page 24) for the connections and settings to make a FAM connection between this unit and a nonlinear editing system.

Notes

•The S400 connector of this unit outputs video/audio signals in DVCAM format. Data recorded in MPEG HD format is output after being converted into DVCAM format.

•The nonlinear editing system to be connected to this unit requires editing software (not supplied) supporting the DVCAM format.

•To transfer video and audio signals (AV/C data), use AUDIO CONTROL >DV OUT MODE (see page 85) in the setup menu to select the audio mode (the factory default is “2ch”).

•This unit’s S400 connector has 6 pins. Check the number of pins on the i.LINK connector of your laptop computer, and use an appropriate i.LINK cable.

 

 

 

PDW-F30 (this unit)

COMPOSITE OUT

AUDIO MONITOR

 

-AC IN

 

 

R L

 

POWER

 

 

 

 

 

AUDIO OUTPUT

 

 

 

1/3

2/4

 

 

 

 

MONITOR

RS232C

REMOTE(9P)

S400

 

 

 

 

S400

i.LINK cable (not supplied)

i.LINK (IEEE1394) connector Laptop computer

On the computer

On this unit

Install editing software

Set the setup menu item

supporting the DVCAM

INTERFACE SELECT

format.

>REMOTE I/F to “i.LINK” (see

 

page 85).

 

Set the setup menu item

 

INTERFACE SELECT >i.LINK

 

MODE to “AV/C” (see page

 

85).

Connections for Cut Editing

By connecting this unit to a VTR, you can configure a cut editing system. Some example connections are shown in the following.

When making the connections, also refer to the manuals provided with the equipment to be connected.

When using the editing functions of the recorder (connections using the S400 connector)

The following figure shows a cut editing system comprising this unit as a player and a DSR-2000A/2000AP unit as a recorder. In this system, video/audio signals and control signals are all transferred through the S400 connector.

Preparations 2 Chapter

Connections and Settings

25