Step 3: Connecting the Audio Cords

Select one of the following patterns, A or B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). This will enable you to listen to sound.

[Speakers]

 

[Speakers]

A

Rear (L)

 

Rear (R)

 

AV amplifier (receiver)

 

 

Front (L)

with a decoder

Front (R)

 

 

 

Centre

 

Subwoofer

 

 

to coaxial digital input

 

 

Coaxial digital cord (not supplied)

to DIGITAL OUT (COAXIAL)

DVD recorder

to LINE OUT (R-AUDIO-L)

 

Audio/video cord

 

INPUT

B

 

 

VIDEO

 

 

(supplied)

 

 

(white)

(yellow)

 

 

 

 

 

 

 

 

L

 

(red)

 

(white)

AUDIO

 

 

 

 

 

 

 

 

R

 

(yellow)*

 

(red)

 

 

TV, projector, or AV amplifier (receiver)

: Signal flow

* The yellow plug is used for video signals (page 12).

ADigital audio input jack

If your AV amplifier (receiver) has a Dolby*1 Digital, DTS*2, or MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch), DTS (5.1ch), and MPEG audio (5.1ch) surround effects.

BAudio L/R (left/right) input jacks

This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound.

zHint

For correct speaker location, see the operating instructions supplied with the connected components.

14