Specifications
System
Laser: Semiconductor laser
Channel coverage:
PAL/SECAM* (B/G, D/K, I)
VHF: E2 to E12, R1 to R12, Italian A to H, Ireland A to J, South Africa 4 to 13
UHF: E21 to E69, R21 to R69, B21 to B69
CATV: S01 to S05, S1 to S20
HYPER: S21 to S41
* not available on Oceanian models
The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances. For details, see “Receivable channels” (page 69).
Video reception: Frequency synthesizer system
Audio reception: Split carrier system
Aerial out:
Timer: Clock: Quartz locked/Timer indication:
Video recording format:
Audio recording format/applicable bit rate: Dolby Digital 2 ch
256 kbps/128 kbps (in EP and SLP mode)
Inputs and outputs
LINE OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0
(S VIDEO):
C:0.3
LINE 1 IN/LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than 22 kilohms
(VIDEO): Phono jack/1.0
(S VIDEO):
C:0.3
DIGITAL OUT (COAXIAL): Phono jack/
0.5
COMPONENT VIDEO OUT (Y, PB/CB, PR/CR):
Phono jack/Y: 1.0
PB/CB: 0.7
PR/CR: 0.7
General
Power requirements:
50/60 Hz
Power consumption: 22 W
Dimensions (approx.):
430 ⋅ 58 ⋅ 291 mm (width/height/ depth) incl. projecting parts
Mass (approx.): 3.1 kg
Operating temperature: 5ºC to 35ºC
Operating humidity: 25% to 80%
Supplied accessories:
Audio/video cord (1) Power cord (mains lead) (1) Aerial cable (1)
Remote commander (remote) (1) R6 (size AA) batteries (2)
Specifications and design are subject to change without notice.
Compatible colour systems
This recorder is designed to record using the PAL colour system and play back using the PAL or NTSC colour systems.
For all models except Oceanian models
The signals of the SECAM colour system can be received or recorded but played back in the PAL colour system only. Recording of video sources based on other colour systems cannot be guaranteed.
Information Additional
89