Step 6: Easy Setup
Make the basic adjustments by following the
[/1
</M/m/,,
ENTER
O RETURN
TV [/1
1 Turn on the recorder and your TV. Then switch the input selector on your TV so that the signal from the recorder appears on your TV screen.
The initial settings message appears.
•If this message does not appear, select “Easy Setup” from “SETUP” in the System Menu (“Settings and Adjustments” on page 68).
2 Press ENTER.
Follow the
Easy Setup - OSD
Select a language for the
Easy Setup - Tuner System
Select “ELSE - English,” regardless of your area or language.
The programme position order will be set.
To set the programme positions manually, see page 68.
Easy Setup - Clock
Set the clock manually using </M/m/ ,, and press ENTER.
Easy Setup - TV Type (page 73)
If you have a
Easy Setup - Audio Connection If you connected an AV amplifier (receiver) using a coaxial cord, select “Yes : DIGITAL OUT” and set the digital output signal (page 75).
3 Press ENTER when “Finish” appears.
“Easy Setup” is finished.
To return to the previous step
Press O RETURN.
zHints
•If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 75).
•If you want to run “Easy Setup” again, select “Easy Setup” from “SETUP” in the System Menu (page 81).
Settings and Hookups
19