Channel
Press M/m repeatedly until the programme position you want is displayed.
The programme positions are scanned in the order shown in the table below.
•If you know the number of the programme position you want, press the number buttons. For example, for programme position 5, first press “0” and then press “5.”
•To disable a programme position, enter “00.” The disabled programme positions will be skipped when you press PROG
•To select a cable or satellite programme position, press M/m until the programme position you want is displayed.
Name
Changes or enters a new station name (up to 5 characters). The recorder must receive programme position information (for instance, SMARTLINK information) for station names to appear automatically.
To enter characters, see page 29.
Audio
Select “NICAM” or “Standard.”
NICAM Normally, select this.
Standard Select this if the sound from NICAM broadcasts is not clear.
AFT
Select “On” to turn on AFT.
On | Turns on the Auto Fine |
| Tuning function. |
| Normally, select this. |
|
|
Off | Allows you to adjust the |
| pictures manually. |
|
|
•If the Auto Fine Tuning function does not work effectively, select “Off” and press ,. Press M/m to obtain a clearer picture, and press <.
Receivable channels
TV system | Channel coverage | |
|
| |
BG | E2 – E12 VHF | |
• Malaysia, |
| |
A – H VHF | ||
Singapore, | ||
| ||
Thailand | AS0 – AS12 VHF | |
• Middle East |
| |
NZ1 – NZ11 VHF | ||
• Australia, New | ||
| ||
Zealand | E21 – E69 UHF | |
|
| |
| AS28 – AS69 UHF | |
|
| |
| S1 – S20 CATV | |
|
| |
| S1 – S46 CATV | |
|
| |
| S21 – S41 HYPER | |
|
| |
| S01 – S05 CATV | |
|
| |
I | A – J VHF | |
• Hong Kong |
| |
4 – 13 VHF | ||
• South Africa | ||
| ||
| B21 – B69 UHF | |
|
| |
| S1 – S20 CATV | |
|
| |
| S21 – S41 HYPER | |
|
| |
| S01 – S05 CATV | |
|
|
For customers in Australia and New Zealand
• Australia
Channel Set number Channel
C2AS0
C3AS1
C4AS2
S44AS3
S46AS4
S1AS5
Adjustments and Settings
,continued 69