Timer Recording (Standard/G-Code)

+RW -RWVR-RWVideo+R -RVR

-RVideo

You can set the timer for a total of 40 programmes, up to 30 days in advance. There are two methods to set the timer: the standard method and G-Code method.

•Standard: Set the date, time, and programme position of the programme manually.

•G-Code: Enter the G-Code programming number designated for each TV programme (page 39).

Setting the timer manually (Standard)

TIMER

</M/m/,,

ENTER

OPTIONS

x REC STOP

1 Press TIMER.

2 Press M/m to select the “Day and

Time” or “Mode” row. Then press

ENTER.

3 Select an item using </, and adjust using M/m. Then press ENTER.

To make additional changes to items in different rows, return to step 2. The adjustable items are listed below. “Day and Time”:

Sets the date, start time, and stop time, and selects the programme position or input source.

The date item changes as follows: Today y …… y Sat 28.10 (30 days

later) y Sun (every Sunday) y ……

ySat (every Saturday) y Mon - Fri (Monday to Friday) y Mon - Sat (Monday to Saturday) y Daily y Today

“Mode”:

Selects the recording mode (page 35). “Extend Time”:

Sets the duration in increments of 10 minutes, for a maximum of 60 minutes when a timer recording is in progress. If the programme set to be recorded daily or weekly is extended, the manually extended time set here will be added to the subsequent timer recording times.

• If you make a mistake, select the item and change the setting.

4 Select “OK,” and press ENTER.

The “TIMER LIST” display (page 41) appears. The TIMER REC indicator lights up on the front panel and the recorder is ready to start recording. Unlike a VCR, there is no need to turn off the recorder before the timer recording starts.

Recording Timer

,continued 37