WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The power cord (mains lead) must be changed only at a qualified service shop.

This appliance is classified as a CLASS 1 LASER product. The

CLASS 1 LASER PRODUCT MARKING is located on the laser protective housing inside the enclosure.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this DVD recorder is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

This label is located on the laser protective housing inside the enclosure.

Precautions

•This unit operates on 220 –

240 V AC, 50/60 Hz. Check that the unit’s operating voltage is identical with your local power supply.

•To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

•Install this system so that the power cord (mains lead) can be unplugged from the wall socket immediately in the event of trouble.

G-CODEis a registered trademark of Gemstar Development Corporation. The G-CODEsystem is manufactured under license from Gemstar Development Corporation.

Disposal of Old Electrical & Electronic Equipment

This symbol is applicable only in the European Union and other European countries with separate collection systems.

Precautions

This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 metres.

On safety

Should any solid object or liquid fall into the cabinet, unplug the recorder and have it checked by qualified personnel before operating it any further.

On power sources

•The recorder is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the recorder itself has been turned off.

•If you are not going to use the recorder for a long time, be sure to disconnect the recorder from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

On placement

•Place the recorder in a location with adequate ventilation to prevent heat build-up in the recorder.

•Do not place the recorder on a soft surface such as a rug that might block the ventilation holes.

•Do not place the recorder in a confined space such as a bookshelf or similar unit.

•Do not place the recorder in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

•Do not place the recorder in an inclined position. It is designed to be operated in a horizontal position only.

•Keep the recorder and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

•Do not place heavy objects on the recorder.

2