Recording From Connected Equipment

+RW -RWVR-RWVideo+R -RVR

-RVideo

INPUT

SELECT

</M/m/,,

ENTER

OPTIONS

zREC REC MODE

x REC

c z

STOP

SYNCHRO

 

REC

3 Select the desired audio signal when recording a bilingual programme to the DVD-RWs/DVD-Rs (VR mode).

Press OPTIONS to select “Line Audio Input,” and press ENTER. Then select “Bilingual,” and press ENTER.

For details about bilingual recording, see page 36.

4 Press REC MODE repeatedly to select the recording mode.

For details about the recording mode, see page 35.

5 Set the timer on the connected equipment to the time of the programme you want to record, and turn it off.

6 Press c z SYNCHRO REC.

The SYNCHRO REC indicator lights up on the front panel. The recorder is ready to start Synchro-Recording.

The recorder automatically starts recording when it receives an input signal from the connected equipment. The recorder stops recording when the connected equipment turns off.

Recording Timer

Recording from connected equipment with a timer (Synchro Rec)

You can set the recorder to automatically record programmes from connected equipment that has a timer function (such as a satellite tuner). Connect the equipment to the LINE 1 IN jacks of the recorder

(page 22).

When the connected equipment turns on, the recorder starts recording a programme from the LINE 1 IN jacks.

1 Insert a recordable DVD.

See “1. Inserting a Disc” on page 23.

2 Press INPUT SELECT repeatedly to select “L1.”

To stop recording

Press x REC STOP or c z SYNCHRO REC.

To cancel Synchro Rec

Press c z SYNCHRO REC.

The SYNCHRO REC indicator on the recorder turns off.

,continued 43