When all of the timer settings do not fit on the list, the scroll bar appears.
To view the hidden timer settings, press M/m.
2 Select the timer setting you want to check/change/cancel, and press
ENTER.
The
3 Select one of the options, and press
ENTER.
“Modify”:
Changes the timer setting.
Select an item using </, and adjust using M/m. Select “OK,” and press
ENTER.
“Erase”:
Erases the timer setting. Select “OK,” and press ENTER.
When the timer settings overlap
The programme that starts first has priority and the second programme starts recording only after the first programme has finished.
will be cut off
When the recordings start at the same time
The programme that is set last has priority. In this example, timer setting B is set after A, so the first part of timer setting A will not be recorded.
When the end time of one recording and the start time of another are the same After finishing the previous recording, the
other recording may be delayed.
“Check Overlap”:
Checks for overlapped settings.
The timer setting without the 
mark has priority over the other settings.
Select “Close” to return to the Timer List. To change or cancel the setting, repeat steps 2 and 3 above.
To scroll the list display by page (Page mode)
Press 
/ 
while the list display is turned on. Each time you press 
/
, the entire Timer List changes to the next/previous page of timer settings.
To turn off the Timer List
Press TIMER LIST or O RETURN.
zHint
While recording, you cannot modify the timer setting for the current recording, but you can extend the duration of the recording time (page 38).
bNotes
•Even if the timer is set, timer recordings cannot be made while recording a programme that has priority.
•Even if the timer is set for the same daily or weekly programme, the timer recording cannot be
made if it overlaps with a programme that has priority. “ 
” will appear next to the overlapped setting in the Timer List. Check the priority order of the settings.
42