Recording Settings (Recording)

The “Recording” setup allows you to adjust recording settings.

1 Press SYSTEM MENU while the recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

3 Select “Recording,” and press

ENTER.

The “Recording” setup appears with the following options. The default settings are underlined.

DVD Rec. Settings

Bilingual Recording (for all recordable discs except DVD-RWs/DVD-Rs in VR mode) Selects the sound to be recorded on the recordable disc. This setting is not necessary when recording on DVD-RWs/DVD-Rs (VR mode) that record both the main and sub sounds.

Main

Records the main sound for

 

the bilingual programme.

 

 

Sub

Records the sub sound for the

 

bilingual programme.

 

 

Timer Settings

Rec Mode Adjust

On

Automatically adjusts the

 

recording mode to enable the

 

entire programme to be

 

recorded (page 38).

 

 

Off

Turns off the function.

 

 

Auto Chapter

Selects whether to automatically divide a recording (a title) into chapters during recording or dubbing.

On

Inserts chapter marks at

 

approximately 6 minute

 

intervals.

 

 

Off

No chapter mark is inserted.

 

 

bNotes

•The actual chapter mark interval may vary depending on the amount of information contained in the video to be recorded.

•Chapter marks are automatically inserted where the recordings start on the tape when “Auto Chapter” is set to “On” during DV dubbing to a DVD-RW/DVD-R (VR mode).

Adjustments and Settings

77