Checking the remaining disc space

You can check the remaining disc space using the “Disc Information” display.

1 Insert a disc.

See “1. Inserting a Disc” on page 23.

2 Press OPTIONS to select “Disc Information,” and press ENTER.

The “Disc Information” display appears. Available settings differ depending on the disc type.

Example: When a DVD+RW is inserted.

“Remainder” (approximate)

•The remaining recording time in each of the recording modes

•Disc space bar

•Remaining disc space/total disc space

zHint

To increase disc space, see “To open up disc space” (page 56).

5.Changing the Name of a Recorded Programme

+RW -RWVR-RWVideo+R

-RVR

-RVideo

You can label a DVD, title, or programme by entering characters. You can enter up to 64 characters for a title or disc name, but the actual number of characters displayed in the menus such as the Title List will vary. The steps below explain how to change the name of the recorded programme.

Number

INPUT

buttons

SELECT

 

TITLE LIST

</M/m/,,

ENTER

1 Press TITLE LIST.

2 Select a title, and press ENTER.

The sub-menu appears.

3 Select “Title Name,” and press

ENTER.

The display for entering characters appears.

4 Press </M/m/, to move the cursor to the right of the display and select “A” (upper-case), “a” (lower-case), or “Symbol,” and press ENTER.

The characters for the selected type are displayed.

Recorder DVD Your Know to Getting — Operations Basic Eight

,continued 29