To stop recording during timer recording

Press x REC STOP.

Note that it may take a few seconds for the recorder to stop recording.

Rec Mode Adjust

If there is not enough available disc space for the recording, the recorder automatically adjusts the recording mode to enable the entire programme to be recorded. Set “Rec Mode Adjust” of the “Timer Settings” to “On” in the “Recording” setup (page 77).

If the timer settings overlap

Overlapped timer settings are shown as follows.

To store the setting as shown, select “OK.” The programme that has a mark next to it has lower priority and will not be entirely recorded.

To cancel the overlapped setting, select “Cancel.”

To confirm, change, or cancel a timer recording

See “Checking/Changing/Cancelling Timer Settings (Timer List)” on page 41.

To extend the recording duration time while recording

1Press OPTIONS during recording to select “Extend Rec,” and press ENTER.

2Press M/m to select the duration time. You can set the duration in increments of 10 minutes, for a maximum of 60 minutes.

3Select “OK” and press ENTER.

zHint

If you are recording to a DVD-RW (VR mode) at a recording mode that is SP or lower and is a 2x speed or higher disc, you can play the title as it is being recorded by selecting the programme title on the Title List (page 50).

bNotes

•If a message indicating that the disc is full appears on the screen, change the disc, or make available space for the recording (DVD+RW/DVD-RW only) (page 57).

•Check that the clock is correctly set before setting the timer recording. If not, the timer recording cannot be made.

•To record a satellite programme, turn on the satellite tuner and select the satellite programme you want to record. Leave the satellite tuner turned on until the recorder finishes recording. If you connect equipment with a timer function, you can use the Synchro Rec function (page 43).

•Even if the timer is set for the same daily or weekly programme, the timer recording cannot be

made if it overlaps with a programme that has priority. “ ” will appear next to the overlapped setting in the Timer List. Check the priority order of the settings.

•Even if the timer is set, timer recordings cannot be made while recording a programme that has priority.

•The Rec Mode Adjust function only works with a timer recording. It does not function with Quick Timer or Synchro Rec.

38